#!/usr/bin/perl

#######################################################################
# LiVES noisify plugin, version 1
# Compiled with Builder version 3.2.0
# autogenerated from script by Marco De la Cruz|

# rendered plugins should accept:
# <plugin_name> version (return <plugin_name> version <version>)
# <plugin_name> get_define
# <plugin_name> get_capabilities
# <plugin_name> get_description (e.g. "Edge detect|Edge detecting|1|1|")
# <plugin_name> clear (clean up any plugin generated temp files)
# and optionally any of: 
# <plugin_name> get_parameters
# <plugin_name> get_param_window
# <plugin_name> get_onchange
# <plugin_name> onchange_<when> (for any triggers, e.g. onchange_init)
#
# they must accept:
# <plugin_name> process <parameters>

# You should not skip any frames, if a frame is not changed you must do:
# `cp $in $out`
#
# for *non-Perl* plugins, LiVES will call:
# <plugin_name> process [<in2_prefix> [<in_prefix>]] <out_prefix> <out_ext> <start> <end>
#  <width> <height> <img_ext> <fps> [<img2_ext> <start2> <handle2>]  <parameters>
# you should create all output frames $out_prefix%08d$out_ext in numerical 
# from start to end inclusive,
# using $in_prefix%08d$in_ext and $in2_prefix%08d$img2_ext as applicable.
# in / out images are in current dir, In2 images can be located in ../handle2 and numbered from 
# Each time calling sig_progress (see smogrify) - writes current frame number to 
# <dir>/.status
# and checking for pause (test for a file of that name in current dir - if present just sleep until deleted)
#
# Any errors - 
# write "error|msg1|msg2|msg3|" to .status
# msgn must not contain "\n", but can be omitted

# after processing, you should leave no gaps in out frames, you should not resize
# or change the palette from RGB24 (LiVES will check and autocorrect this soon)

# Also you must implement your own: &sig_error and &sig_progress


#######################################################################

use POSIX;
setlocale(LC_NUMERIC, "C");

my $command = $ARGV[0];

if ($command eq "get_capabilities") {
    # capabilities is a bitmap field
    # 0x0001 == slow (hint to GUI)
    # 0x0002 == may resize (all frames to  x )
    # 0x0004 == block mode generator
    # 0x8000 == reserved
    print "32769\n";
    exit 0;
}

if ($command eq "version") {
    print "noisify version 1 : builder version 3.2.0\n";
    exit 0;
}

if ($command eq "get_define") {
    print "|1.7\n";
    exit 0;
}

if ($command eq "get_description") {
    #format here is "Menu entry|Action description|min_frames|number_of_in_channels|"
    # min_frames == -1 indicates a special "no processing" effect. This allows more
    #general parameter windows which are not really effects (e.g. frame_calculator)
    print "Noisify|Adjusting noise on|1|1|\n";
    exit 0;
}


if ($command eq "get_parameters") {
    # "name|label|type|other fields..."
    # eg. print "radius|_radius|num0|1|1|100|";
    # types can be numx, colRGB24, bool, string or string_list
    print "add|Add noise|bool|1|1|\n";
    print "red|Reduce noise|bool|0|1|\n";
    print "xx||bool|0|2|\n";
    print "every|every|num0|1|1|10000|\n";
    print "type|Noise type|string_list|0|Impulse|Uniform|Gaussian|Multiplicative|Laplacian|Poisson|\n";
    print "radius|Reduction radius|num0|1|1|10000|\n";
    print "yy||bool|0|0|\n";
    print "every2|every|num0|1|1|10000|\n";
    print "zz||bool|1|2|\n";
    print "const|Constant noise level|num0|1|1|50|\n";
    exit 0;
}

if ($command eq "get_param_window") {
    print "layout|p0|fill|p4||\n";
    print "layout|p8|p9||\n";
    print "layout|p2|\"Increase noise\"|p3|\"frame(s)\"||\n";
    print "layout|hseparator||\n";
    print "layout|p1|fill|p5||\n";
    print "layout|p6|\"Decrease noise\"|p7|\"frame(s)\"||\n";
    exit 0;
}

if ($command eq "get_onchange") {
    print "init|\n";
    exit 0;
}

#######################################################

if ($command eq "process") {
    # in case of error, you should do:
    # &sig_error("msg1", "msg2", "msg3", "msg4"); [ msg's are optional, but must not
    # contain newlines (\n) ]

##### check requirements first #######
    if (&location("convert") eq "") {
      &sig_error("You must install 'convert' before you can use this effect.");
      exit 1;
    }
    if (&location("convert") eq "") {
      &sig_error("You must install 'convert' before you can use this effect.");
      exit 1;
    }

###### handle parameters #############
# autogenerated from get_parameters

    unless (defined($ARGV[1])) {
      $p0 = 1;
    }
    else {
      $p0 = $ARGV[1];
    }
    unless (defined($ARGV[2])) {
      $p1 = 0;
    }
    else {
      $p1 = $ARGV[2];
    }
    unless (defined($ARGV[3])) {
      $p2 = 0;
    }
    else {
      $p2 = $ARGV[3];
    }
    unless (defined($ARGV[4])) {
      $p3 = 1;
    }
    else {
      $p3 = $ARGV[4];
    }
    unless (defined($ARGV[5])) {
      $p4 = 0;
    }
    else {
      $p4 = $ARGV[5];
    }
    unless (defined($ARGV[6])) {
      $p5 = 1;
    }
    else {
      $p5 = $ARGV[6];
    }
    unless (defined($ARGV[7])) {
      $p6 = 0;
    }
    else {
      $p6 = $ARGV[7];
    }
    unless (defined($ARGV[8])) {
      $p7 = 1;
    }
    else {
      $p7 = $ARGV[8];
    }
    unless (defined($ARGV[9])) {
      $p8 = 1;
    }
    else {
      $p8 = $ARGV[9];
    }
    unless (defined($ARGV[10])) {
      $p9 = 1;
    }
    else {
      $p9 = $ARGV[10];
    }
    $p0 = ~(~$p0);
    $p1 = ~(~$p1);
    $p2 = ~(~$p2);
    $! = 0;
    if ($p3 >= 0) {
        $p3 = int(POSIX::strtod($p3) * 1 + .5) / 1;
    } else {
        $p3 = int(POSIX::strtod($p3) * 1 - .5) / 1;
    }
    if ($p3 < 1) {
       &sig_error("every must be >= 1");
       exit 1;
    }
    if ($p3 > 10000) {
       &sig_error("every must be <= 10000");
       exit 1;
    }
    $! = 0;
    if ($p5 >= 0) {
        $p5 = int(POSIX::strtod($p5) * 1 + .5) / 1;
    } else {
        $p5 = int(POSIX::strtod($p5) * 1 - .5) / 1;
    }
    if ($p5 < 1) {
       &sig_error("radius must be >= 1");
       exit 1;
    }
    if ($p5 > 10000) {
       &sig_error("radius must be <= 10000");
       exit 1;
    }
    $p6 = ~(~$p6);
    $! = 0;
    if ($p7 >= 0) {
        $p7 = int(POSIX::strtod($p7) * 1 + .5) / 1;
    } else {
        $p7 = int(POSIX::strtod($p7) * 1 - .5) / 1;
    }
    if ($p7 < 1) {
       &sig_error("every2 must be >= 1");
       exit 1;
    }
    if ($p7 > 10000) {
       &sig_error("every2 must be <= 10000");
       exit 1;
    }
    $p8 = ~(~$p8);
    $! = 0;
    if ($p9 >= 0) {
        $p9 = int(POSIX::strtod($p9) * 1 + .5) / 1;
    } else {
        $p9 = int(POSIX::strtod($p9) * 1 - .5) / 1;
    }
    if ($p9 < 1) {
       &sig_error("const must be >= 1");
       exit 1;
    }
    if ($p9 > 50) {
       &sig_error("const must be <= 50");
       exit 1;
    }
    if ($img_ext eq ".png") {
        $img_prefix = "PNG32:";
    } else {
        $img_prefix = "";
    }

    if ($out_ext eq ".png") {
        $out_prefix = "PNG32:";
    } else {
        $out_prefix="";
    }

    $noise="noise";
    if ($p0) {
       $pre="+";
    
       if ($p4==0) {
        $ntype="Impulse";
       }
       elsif ($p4==1) {
        $ntype="Uniform";
       }
       elsif ($p4==2) {
        $ntype="Gaussian";
       }
       elsif ($p4==3) {
        $ntype="Multiplicative";
       }
       elsif ($p4==4) {
        $ntype="Laplacian";
       }
       elsif ($p4==5) {
        $ntype="Poisson";
       }
    }
    elsif ($p1) {
       $pre="-";
       $ntype="$p5";
    }
    $param=" $pre$noise $ntype ";
    $nstep=1;
    $fstep=1;
    if ($p2) {
       $nadd="$p3";
    }
    elsif ($p6) {
       $nadd="$p6";
    }
    else {
       $nadd=1;
    }
    if ($p8) {
       $cnl="$p9";
    }
    else {
       $cnl=1;
    }

    if ($start == 0) {$start = 1;}


################# loop through frames #################
    for ($frame = $start; $frame <= $end; $frame++) {
        # sig progress will update the progress bar from $start->$end
        $name = &mkname($frame);
        $in = "$name$img_ext";

        if (!defined($end) || $end == 0) {
            print STDERR "WARNING: generator plugin did not set $end !";
            &sig_error("Generator plugin did not set $end.");
        }
        $out = "$name$out_ext";

        # wait for front end to create 
        while (! -s $in) {
            sleep 1;
        }

        `flock $in true`;
##################### the all-important bit #######################

        if ($p2||$p6) {
           if ($nstep==$fstep) {
              if ($nstep <= 50) {
                 $totnoise=$param x $nstep;
              }
              else {
                  $totnoise=$param x 50;
              }
              $nstep+=$nadd;
           }
        }
        else {
           $totnoise=$param x $cnl;
        }
        `$convert_command $img_prefix$in $totnoise $out_prefix$out`;
        $fstep++;

###################################################################
        for (my $i = 0; $i < 5; $i++) {
            if (! -s $out) {
                sleep 1;
            }
        }

        if (! -s $out) {
            print STDERR "Warning: effect plugin noisify skipped frame $frame !\n";
            return 1;
        }

        &sig_progress($frame);

        }
    return 1;
}



########## Post loop code ############
if ($command eq "clear") {
    exit 0;
}

########## Triggers ############

if ($command eq "onchange_init") {
    $p0 = @ARGV[1];
    $p1 = @ARGV[2];
    $p2 = @ARGV[3];
    $p3 = @ARGV[4];
    $p3_min = @ARGV[5];
    $p3_max = @ARGV[6];
    $p4 = @ARGV[7];
    $p5 = @ARGV[8];
    $p5_min = @ARGV[9];
    $p5_max = @ARGV[10];
    $p6 = @ARGV[11];
    $p7 = @ARGV[12];
    $p7_min = @ARGV[13];
    $p7_max = @ARGV[14];
    $p8 = @ARGV[15];
    $p9 = @ARGV[16];
    $p9_min = @ARGV[17];
    $p9_max = @ARGV[18];
    $width = @ARGV[19];
    $height = @ARGV[20];
    $start = @ARGV[21];
    $end = @ARGV[22];
    $last = @ARGV[23];
    $length = $end - $start + 1;

    $p8=1;

    print "$p0 $p1 $p2 $p3 $p3_min $p3_max $p4 $p5 $p5_min $p5_max $p6 $p7 $p7_min $p7_max $p8 $p9 $p9_min $p9_max ";
    exit 0;
}
